(1)
Power on the weather station first.
(2)
Then power on the sensor.
(3)
Confirm that the clock and the sensor are in the same channel.
(4)
After establishing a connection, the sensor transmits data every 60 seconds
to update the temperature and humidity data.
(5)
If the connection failed, please hold “
▼
” for 2-3 seconds to clean up the data
and restart to receive the data. And press the button “TX” on the back of the
sensor to transmit a signal. The connection will be re-established.
If there is a horizontal line on the screen (not displaying the
temperature and the humidity), please ensure your station and the
sensor are in the same channel. And if you have only 1 sensor,
please deactivate the automatic channel switching by pressing ”
▼
”,
the "loop" mark will disappear in the channel zone on the screen.]
Please note : that the transmitting distance is within about
60m/196feet. The displayed temperature and humidity will be
more accurate after 3 hours. If there is some error, please wait
about 3 hours. Indoor and outdoor temperature error within ±1
℃
,
indoor and outdoor humidity error within ±5%.
3 : Does it run on batteries during a power outage so that the alarm
clock will still wake you up?
A
：
Yes, the alarm clock will wake you up also when powered by
batteries. The weather station can be used with power adapter(in
the package) or batteries(not included in the package). If powered
by adapter, the screen will be brighter and stay always bright. If
powered by batteries, the screen will be darker and it will be off
after 8-15 seconds to save battery power.
