9
4 . If the signal does not recover within 48 hours, the “--” display will become permanent you
need to replace the batteries of “--” channel’s sensor(s) and then press
[ SENSOR / SYNC]
key to pair up the sensors of each “--” channels again .
NOTE:
After replacing the batteries of the wireless sensor or the unit fails to receive sensor signal of
a specified channel. During the failed channel is displaying, press
[ SENSOR / SYNC ]
key to
manually receive that sensor signal again .
COMFORT INDICATION
The comfort indication is a pictorial indication based on indoor air temperature and humidity in
an attempt to determine comfort level .
Too cold
Comfortable
Too hot
NOTE:
Comfort indication can vary under the same temperature, depending on the humidity .
There is no comfort indication when temperature is below 0°C (32°F) or over 60°C (140°F) .
WIND
Viewing Wind Direction
Past wind directions
indicator of last 5
minutes
Wind direction in 360°
or 16-direction
Real time wind
direction indicator
Wind speed
level
Average / gust
wind speed
To select the wind display mode
In normal mode, press
[ WIND ]
key to switch between
AVERAGE
and
GUST
wind speed .
To set the wind speed unit and direction display format
1 . In normal mode, press and hold
[ WIND ]
key for 2 seconds to enter into wind speed unit
mode and the unit will flash. And then press
[ GRAPH / ]
or
[ HISTORY / V ]
key to
change the wind speed unit in this sequence: m/s
→
km/h
→
knots
→
mph
2 . Press
[ WIND ]
key again to enter into wind direction display format setting mode . The wind
direction reading will flash and then press
[ GRAPH / ]
or
[ HISTORY / V ]
key to select
the display format between 360° and 16-direction .
3 . Press
[ WIND ]
key again to return to normal mode .
Wind Speed Level
Level
LIGHT
MODERATE
STRONG
STORM
Speed
0.1km/h ~19km/h 20km/h ~ 49km/h
50km/h ~ 88km/h
> 89km/h
