7
“button to adjust the setting value, press “MODE” (B2) to confirm the setting.
Setting Sequence as follow: Upper limit of temperature, Lower limit of
Temperature.
When it’s alert, the corresponding icon “
” or “
” and temperature digit
would flash on the LCD. Press any buttons to stop the alert sound
,
otherwise, it
will sound for 2 minutes, and stop automatically.
(6) Comfort Indicator Bar
(A6) for the display of pleasant/unpleasant
climate.
8. Time and Alarm Setting
8.1 Radio Controlled Clock:
After batteries inserted and main unit finishes receiving the transmission from
outdoor sensor, the clock automatically starts to scan the MSF time signal. Radio
Control Icon“
” flashes on the LCD.
flashes
，
Indicating now is receiving
MSF signal
turns on,
Indicating signal received
successfully
disappear,
Indicating signal reception
failed
The clock automatically scans the time signal at 2.00 a.m. every day to maintain
accurate timing. If reception fail, scanning stops (“
” on LCD disappear)
The clock can be set to scan the time signal manually by holding “+”& “-“buttons
(B4&B5) for 3 seconds. Each reception takes about 5 minutes.
Stop scanning by holding “+”& “-“buttons (B4&B5) for 3 seconds.
“
” shown on the LCD if it is in Daylight Saving Time Mode.
8.2 Manual Time Setting:
Hold “MODE” button (B2) for 3 seconds to enter Clock/Calendar setting mode.
Press “+” (B4) or “-” (B5) button to adjust the setting and press “MODE” button
(B2) to confirm each setting.
(By keeping the
“+” (B4) or “-” (B5)
button pressed, could accelerate the process
and reach the desired value more quickly)
The setting sequence is shown as follow: 12/24 Hour, Hour, Minutes, Second, Year,
Month, Day,
Note
:
(1) Second adjusted to zero only.
(2) The Time Setting Mode will automatically exit in 15 seconds without any
adjustment.
