4
5. Installation
5.1 Main Unit
The main unit can be placed onto any flat surface (C3), or wall mounted by the
hanging hole (C1) at the back of the unit.
5.2 Outdoor Thermo sensor
The remote sensor should be securely mounted onto a horizontal surface. This
sensor must be installed where you can avoid Direct Heavy rain and Direct sun shine
for accurate readings.
Note:
Transmissions between receiver and transmitter can reach up to 30m in open
area. Open Area: there are no interfering obstacles such as buildings, trees, vehicles,
high voltage lines, etc.
6. Weather Forecast Function
6.1 Operation
After Batteries inserted, or holding “WEATHER” button (B8) for 3 seconds,
weather icon flash (A5) on the LCD. Enter the current weather by pressing “
-
” (B5)
or “
+
“(B4) button. Press “WEATHER” (B8) button to confirm the setting. The
weather forecast may not be accurate if the current weather entered is not
correct.
There are two weather icons, the left one indicate current weather condition, the
right one forecasts the weather in terms of getting better or worse. The weather
station will start the first forecast at 6 hours later after the current weather
status is entered.
The current weather status should be entered again if the altitude of the Main
Unit is changed. (Barometric pressure is lower at higher altitude location.
Therefore, altitude change will affect the weather forecast).
6.2
Weather Conditions
There are totally 5 different weather status animations in the weather forecast.
Sunny
Slightly Cloudy
Cloudy
Rainy
Freezing or Snow