Youngman BOSS X Series, Руководство пользователя

Страница: 22 / 40

20 BoSS X-Series Instructions for Use
4.9 Battery chargIng - contInueD
To charge the battery, follow the steps below:
a. Depress the emergency stop button on
the handset control unit and remove the
key.
b.
Remove the cover from the charging
connection point. as shown in figure 1
below.
Figure 1 Figure 2
c. Connect either the mains or 110V
transformer charging cable to the BoSS
X-Series machine charging connection
point, as shown in figure 2 above. These
cables are to be found in the charging
cable and guardrail tools tray under the
step up to the platform.
d.
Connect the charging cable to a suitable
power supply (110V transformer or mains)
e.
Whilst the battery is charging to 80% of
capacity the second light will be flashing
as shown in figure 1 below and when
the charging of the remaining 20% is
underway the third light will begin flashing
as indicated in figure 2 below.
Figure 1 Figure 2
f. When the battery is fully charged all four
lights will illuminate after approximately
10 hours.
WarnIng
BoSS X-Series machines must be charged
where the ambient temperature is between 0
and 50
° C.