Overview
Main body
1. Ceramic cover
2. Inner lid
3. Water tank
4. Mist spout
5. Ventilation hole
6. Water marker
7. Mist chip
8. Fan
9. LED light
10. Mist button/Time setting
11. DC socket
12. Air inlet
13. Power adapter
1
2
4
1
6
9
7
8
3
5
13
2. Remove the Inner lid. 3. Add water to the water
tank until it reaches the RED
maximum water marker.
1. Hold the base and remove
the ceramic cover.
FRAGILE!
Handle
with care
FRAGILE!
Handle
with care
FRAGILE!
Handle
with care
5. Replace the Inner lid. 6. Replace the ceramic cover.
Ensure the ceramic cover
and the base are aligned.
4. Add 10-12drops of your
favourite essential oil to
the water tank.
Operating Instructions
Caution:
8. Press the Mist button to
start the device and
switch the timer.
9. Diffuser will begin
diffusing.
7. Plug Power adapter into
a power outlet.
Mist
LED Light
Note:
Setting Instructions
Cleaning and Maintenance
• Always disconnect the AC adaptor from the device before cleaning.
2. Hold the base and remove
1. Power off and disconnect
the ceramic cover.
3. Remove the Inner lid.
the device from the
power outlet.
5. Pour any remaining water
down the drain.
Caution:
• Never soak or wash this product directly as it may cause mechanical malfunction
or danger.
• Never use acidic cleansing agents as it may cause malfunctions to the product.
• Use cotton swab to clean the unit after each use. Rinse with tap or spring water,
then wipe with a dry cloth.
• The water tank must be cleaned before the essential oil is changed each time.
• Use tap water or spring water.
• Allow to dry thoroughly after use/ cleaning.
• Make sure no water will spit into the air duct outlet as it might break the
electrical circuit.
10
11
12
• Always place your diffuser on a firm, flat and level surface.
1. Be sure to hold the whole product with the base carefully when moving the product.
Handle this product with care to avoid impacts or drops.
2. The unit should be placed on a level solid surface. Do not place on carpets, rugs,
wooden/polished furniture or unstable surfaces.
3. Use a suitable measuring cup to fill the water into the water tank. Never attempt to
fill water under a running tap or whilst plugged in.
4. The water level should not exceed the water marker to avoid damage to this device.
5. Keep water away from Ventilation Hole and Air Inlet.
6. For best result, we recommend to use natural essential oil with this scent diffuser.
Artificial fragrance, flavor, or impurities might harm to the unit.
7. Always unplug the product from electrical socket when not in use.
8. Do not remove the cover or lid during operation.
• Press the button once to turn ON the unit. The default time is 2hours, indicated by
the 2H LED light.
• Press the button a second time and the working time is set to be 8 hours, indicated
by the 8H LED light.
• Press the button a third time and the working time is set to be 16 hours
intermittently, indicated by the 16H LED light. (5mins ON and 5mins OFF).
• Press the button a fourth time to switch diffuser OFF.
• Once you turn on the diffuser, the candlelight will ON automatically.
• Long press for 2sec to turn off the LED light, long press for another 2sec to turn on
the LED light.
1. A slight difference in mist amount produced by different units is expected.
2. Factors affecting the mist amount:water,humidity,temperature, and air flow.
3. Automatically shut-off function when the diffuser detects the water is empty or
when it is tipped over.
4. LED indicator will slightly turn off in 10sec when you selected the mode.
4. Make sure the ventilation
hole is not subject to spilling.
Pour water out from the
opposite side of the
ventilation hole.
6. Use a cotton swab
dipped in rubbing alcohol
to clean inside the base,
then rinse thoroughly with
water. Clean the diffuser
no less than twice a week.
