8
Attaching the Crib Side
Step 4:
x
Position (1) Crib Side, as shown in Figure
4a, by aligning the Locater Pin on the top
edge of the Base Rail with the hole in the
bottom rail of the Crib Side.
x
Gently spread the top of the Crib Ends to
allow the Locater Pins in the Crib Ends to
engage the holes in the ends of the Crib
Side top rail. See Figure 4b.
x
Insert (4)
2”
Connector Bolts into the holes
that are in the end uprights of the Crib Side.
Loosely attach the Crib Side to the Crib
Ends using the provided wrench. Do not
tighten the bolts at this time. See Figure 4c.
x
Figure 4d is how your Crib should look at
this point.
Figure 4a.
Figure 4b.
Figure 4a.
Figure 4b.
Figure 4c.
Figure 4c.
Figure 4d.
