7
Attaching the Crib Base
Step 3:
x
Gently lay the assembled Crib Ends and Side Rails on its side on a padded surface.
x
Align the Base with the bottom of the assembled components. The connector holes located in the
Base will align with the inserts located in the Crib Ends and Rails. See Figure 3a.
x
Locate (10) 2” Connector Bolts. Insert the Connector Bolts into the aligned holes. See Figure 3b.
x
Gently tighten the Connector Bolts in a Clockwise motion with the Allen Wrench provided. Do
not completely tighten at this time. See Figure 3c.
x
Return partially assembled Crib to the upright position. See Figure 3d.
Figure 3a.
Crib Base
Crib Ends and Rails
Figure 3b.
Figure 3c.
Figure 3d.
