background image

 

Crib Assembly 

NOTE: Read all instructions before assembling crib.  KEEP INSTRUCTIONS FOR    
FUTURE REFERENCE. 
 
Attached to the mattress platform is a sleeve to store the instruction booklet.   
After assembly is complete, return this instruction booklet to the sleeve for future         
reference. 
 
This crib conforms to the ASTM International and the CPSC-Consumer Product Safety 
Commission guidelines for product safety.  Please adhere to the guidelines in this book-
let for assembly, operation and maintenance. 
 
Note the recommendations below: 
 

x

Power tools are not recommended for assembly. 

x

Give yourself plenty of room to work. 

x

Due to the size of this bed, it must be assembled in the space it will occupy. 

x

The assembly will take two people to complete. 

x

Layout all the hardware and make sure that the proper length bolts are used in the 
designated areas. 

x

Do not substitute hardware.  If an item is missing or damaged contact Stanley     
Furniture Company immediately for replacement.  Inspect all component parts and 
hardware prior to beginning the assembly process. 

x

Make sure all fasteners are tight. 

x

Above all, take your time and read the instructions carefully. 

 
 

Tools required for Assembly: 

x

Flathead Screwdriver 

x

Allen Wrenches (provided) 

This Crib is equipped with these additional features: 

Barrel Nut Retainer Bracket— The Bracket is located on each end of the Base Rails. 
It is designed to prevent loss of Barrel Nuts during assembly and disassembly of 
crib.  

Bolt Retainer Sleeve—The Retainer Sleeves are located where Connector 
Bolts are used to assemble the crib. It is designed to prevent loss of the Con-
nector Bolts after crib is disassembled. The Bolt Retainer Sleeves are perma-
nently installed at the factory. 

Содержание Kudos SSC 1600


















Отзывы: