RIT/MOD Button
RIT Mode:
Press this key to enter or exit the RIT function. A dash (-) will be displayed to the right
of the frequency as shown above. In the RIT mode, the Tuning knob controls the offset
of the received frequency from the transmit frequency. The transmit frequency is
unchanged. The dash (-) indicates that the received frequence is the same as the
transmit frequency (zero offset). Turnng the Tuning knob clockwise raises the received
frequency, as indicated by the up arrow. Turning the Tuning knob counter-clockwice
lowers the frequency, as shown by the down arrow. In each case, the displayed
frequency is the received frequency. After exiting the RIT mode, the receiver offset
returns to zero.
CW/USB/LSB Mode Changes:
To change mode, press and hold RIT/MOD for two seconds. Press and hold RIT/MOD
for two seconds for each change.
