Imagined by You
™
www.tiohome.com
AZSS1 Installation Guide
21
Troubleshooting Guide
Symptom
Can not find the AZSS1 on the network
No Control Elements Found
Cause
No AC power
TiO elements are not “ON”
or configured properly
Solution
Make certain AC power cord
is plugged into a live outlet
You can test-drive the App by
selecting “Demo Mode”
Status LED
BLUE
GREEN
YELLOW
YELLOW BLINKING
RED
RED BLINKING
Issue
None
None
• After Over Temperature:
Blinks Yellow in one second intervals
• Power Supply Over Voltage:
Solid Yellow
• No Ethernet: Solid Red light
• Speaker Short:
• Blinks Red in one second intervals
Solution
None
None
Automatically recover from fault
conditions when fault is corrected
• Verify Ethernet connections
• Verify Speaker wiring
Diagnostics/LED Functionality
NOTE: The screen brightness is adjustable in the TiO system configuration software and is set to a default of fifty percent.