YOSUDA CARDIO CLIMBER, Руководство пользователя

Страница: 17 / 20

15
COMPUTER WITH PULSE INSTRUCTIONS
Functional Button:
MODE
–
Press it to select functions.
–
Hold it for 5 seconds to convert KM/H or Mile/H
SET
–
To set value of time, distance and calories, pulse when not in scan
mode.
RESET
–
Press to reset time, distance and calories.
–
Hold it for 3 seconds to reset time, distance and calories, pulse.
Functional and Operations:
1. SCAN: Press MODE button until “SCAN” appears, monitor will rotate
through the following functions: time, calories, speed, distance and total
distance. Each display will be hold 4 seconds.
2. TIME(TMR): Count the total time from exercise start to end.
3. SPEED(SPD): Display current steed.
4. DISTANCE(DST): Count the distance from exercise start to end.
5. CALORIES(CAL): Count the total calories from exercise start to end .
6. TOTAL DISTANCE(ODO): Count the total distance after installing the
batteries.
7. PULSE RATE:
Press MODE button until
〝 〞
appears. Before measuring your pulse rate,
please place both your palms on the contact pads and the monitor will
show your current heart beat rate in beats per minute(BPM) on the LCD
after 3~4 seconds.
Remark: During the process of pulse measurement, because of the contact
jamming, the measurement value may be higher than the virtual pulse rate
during the first 2~3 seconds, then it will return to normal level. The
measurement value can not be regarded as the basis of medical treatment.
8. AUTO ON/OFF & AUTO START/STOP
Without any signal for 4 minutes, the power will turn off automatically.
When the wheel is in motion or pressing the button, the monitor is in action.
9. ALARM
The functions of time, distance and calorie can be set countdown, any of
above value goes to zero, the computer will alarm for 5 seconds.
After establishing a good target pulse, if the user's actual pulse exceed the
target pulse, the electronic watch will have been reporting to the police a
hint.
Press MODE to select the function, then press SET to adjust the value.