11
■
EPDT-213b
■
7.2 Precaution for inspection
Caution
1. Do not disassemble the bellows while the thermal bulb is heated.
* Failure to follow this notice may damage the bellows and prevent the product from functioning properly.
2. Do not give any shock to the thermal bulb.
Warning
Inspection must be done by experienced professional or valve manufacturer.
Completely discharge the pressure inside of the product, piping and equipment prior
to disassembly and inspection. When fluid is hot, cool down the product to the
condition that it can be touched with bare hands.
* Failure to follow this notice may result in scalds, injury or contamination on the
surroundings due to the residual pressure.
