YOSensi YO Temp, Руководство пользователя

Страница: 12 / 27

YO Temp User guide v1.1 page 12/27
Figure 10 Input cable passing through the cable gland instructions.
4. Pull the temperature sensor through the cable gland. You can connect one, two or three
external temperature sensors as required.
Press the spring contact and insert the appropriate wire into the corresponding slot in the
connector:
GND - black or blue wire (depending on the batch)
DATA - yellow wire
VCC - red wire
Tighten the cable gland to immobilise the external sensor wires and maintain tightness.
Figure 11 Connecting input cable instructions.
5. Place three LR6 batteries in the device according to the polarity indicated on the battery
holder.
www.yo sensi . io