YO People Counter
User guide
v1.0
page 25/35
-
acttype:
used for setting the device in ABP or OTAA mode.
-
deveui, …, appskey:
predefined addresses and keys. These parameters are generated using
multiple IDs specific to the particular MCU and are unique for each device. They can be
changed if needed.
-
interval:
determines the interval of sending broadcast packets, used to connect to every BLE
receiver around the device.
-
ssubband:
sets the communication frequency sub-band in LoRaWAN.
-
measinterval:
interval of sending each LoRa payload.
-
clearsumtime:
if, after a given time, there is no movement detected, the device clears its
counters.
-
radarfreq:
frequency channel of the radar sensor mounted on the device.
-
holdtime:
parameter that keeps the information about tracking an object or person passing by
from one side to another. It counts the time between additional measurements after the
object leaves the radar field of the view.
-
sensitivity:
sensitivity of radar to detect people passing by near device value in dB, 10 is the
highest, and 60 is the lowest.
-
beamanglemin:
It describes the field view of the sensor. The minimum beam angle of the
sensor detects a person passing a field view of the device. The angles locate on which side the
target is. Negative or positive defines a wider or shorter target detection field.
-
beamanglemax:
It describes the field view of the sensor. The maximum beam angle of the
sensor detects a person passing a field view of the device. The angles locate on which side the
target is. Negative or positive defines a wider or shorter target detection field.
-
beamanglethreshold:
It describes the field view of the sensor. A parameter in an angle checks
when the person or object moves a nearby sensor from one side to another. The default value
of zero means the person who went from the left or right side informs the sensor about
approaching or moving away.
-
trackfilter:
there are three types of track filters. First, the ‘standard’ filter tracks various
targets, such as cars or persons. Second, the ‘fast’ filter enables faster detection of targets
with the disadvantage of reducing immunity against reflections and other interferences.
Third, the ‘long’ filter has high immunity against interference and a high prediction of
temporarily lost targets.
-
defaultsettings:
parameter that helps the user return to default settings in case of a mistake
during device configuration. To set the default setting, type ‘true’ and upload it to the device.
Parameter description for additional future usage
-
distancerange:
maximum distance range for measurements.
REV 1.0
