York YVAA Style A Скачать руководство пользователя страница 17

Страница: 17 / 184

JOHNSON CONTROLS

Form 201.28-NM1.1

Issue date: 08/06/2021

SECTION 2 - PRODUCT DESCRIPTION

Semi-hermetic YORK twin-screw

compressors

Compressors are direct drive, semi-hermetic amd

rotary twin-screw type, including: muffler, temperature

actuated ‘off-cycle’ heater, IP55 terminal board and

precision machined cast iron housing.
Reliable suction gas cooled, high efficiency, acces-

sible hermetic compressor motor, full suction gas flow

through mesh screen filter, with inherent internal ther-

mal overload protection and external current overload

on all three phases.
Continuous function, microprocessor controlled,

Variable Speed Drive (VSD) must provide valve-less,

smooth capacity control from 100% down to 10% of

chiller capacity.
In addition, elimination of the slide valve and associ-

ated unloading components has resulted in a 50% re-

duction in compressor moving parts.

Evaporator

The evaporator is a shell and tube, hybrid falling film

type heat exchanger. It contains a balance of flooded

and falling film technology to optimize efficiency, min-

imize refrigerant charge, and maintain reliable control.

A specifically designed distribution system provides

uniform refrigerant flow for optimum performance.

Condenser

The YVAA introduces micro-channel coil to the YORK

screw compressor chiller line. The micro-channel max-

imizes condenser heat transfer, resulting in a smaller

footprint, and reduces refrigerant charge by as much

as 50%.
Each condenser coil is a single piece all aluminum

construction including headers, tubes and fins to avoid

galvanic corrosion due to dissimilar metals. Coils and

headers are brazed as one piece. Integral subcooling

is included. The design working pressure is 375 psig

(25.9 barg).
Multiple, standard low sound, high efficiency, TEAO

motor driven fans move air through the coils. They are

dynamically and statically balanced, direct drive with

corrosion-resistant glass fiber reinforced composite

blades molded into low-noise, full airfoil cross sec-

tions, providing vertical air discharge from extended

orifices for efficiency and low sound.

Fan motors are Totally Enclosed Air-Over (TEAO),

squirrel-cage type and current protected. The direct

drive motors feature double-sealed and permanently

lubricated ball bearings, cutting down on maintenance

cost over the life of the unit.

Refrigerant circuit

An independent refrigerant circuit is provided per

compressor. Each circuit uses copper refrigerant pipe

formed on computer controlled bending machines to

reduce the number of brazed joints resulting in a reli-

able and leak resistant system.

• Discharge lines are provided with a manual com-

pressor shutoff service valve See

Accessories and

Options on Page 19

, for suction line service

valve).

• The external oil separators, with no moving parts

and designed for minimum oil carry-over, are

mounted in the discharge line of the compressor.

• Liquid line components include: high absorp-

tion removable core filter-drier, sight glasses with

moisture indicators, manual shut-off valve with

charging port, orifice and electronic expansion

valve.

•

An economizer (flash) tank is located in each re

frigerant circuit to increase the system efficiency.

Electrical

Johnson Controls has over 25 years of experience de-

signing variable-speed drives specifically for chiller

applications. The result is an extremely reliable air-

cooled chiller system that offers industry leading ef-

ficiency at real world operating conditions, valve-less

compressor loading/unloading, excellent capacity con-

trol, high power factor and soft start..
Incoming single point power is standard utilizing a

lockable circuit breaker, 115 VAC control transformer,

VSD, fan contactors, ON/OFF unit switch, microcom-

puter keypad and display, Chiller Control and VSD

Logic boards, and relay boards.
Standard design includes IP55 rating, powder painted

steel cabinet with hinged, latched, and gasket sealed

outer doors equipped with wind struts for safer servic-

ing. The panel includes a control display access door so

that display and control features can be accessed with-

Содержание YVAA Style A

























































































































































































Результаты поиска

Содержание YVAA Style A

Отзывы:

Бренды по названию

Популярные бренды

York YVAA Style A, Установка, эксплуатация и обслуживание

Результаты поиска

Содержание YVAA Style A

Отзывы:

Бренды по названию

Популярные бренды