YORK INTERNATIONAL
14
FORM 102.20-FA1 (1104)
b)
Slide coil onto forklift or cribbing.
c)
Carefully guide coil away from bulkheads and
raceways.
d)
Set coil on four” x four” blocking.
FIG. 19 - MOVING COIL
FIG. 20 - BLOCK COIL
19 – REMOVE COIL BULKHEAD
FIG. 21 - REMOVE COIL BULKHEAD
Do not remove drain pan unless
necessary to fi t through entranceway.
A positive water/air seal is extremely
diffi cult in the fi eld.
20. REMOVE BOTTOM TIER RACEWAYS
a)
Remove 3/16" hex allen head screws from bot-
tom of vertical raceways.
FIG. 22 - REMOVE 3/16" HEX ALLEN SCREWS
b)
Separate raceway assembly from base and set
aside.
