York Pacer 3501, Руководство пользователя

Страница: 5 / 9

5.Assembling
6. Adjusting and testing
1. Put safety key to the position of electronic meter.
2. Before turning on the power, must check: proper voltage; plug is well
ground-connected, the running belt moved smoothly and no noise.
3. Press the button "on/off", the treadmill begins running with a low speed
(1.0km/h), observe if the machine works normally.
4. Press the button "fast key", slow key" to see if the speed adjustment is work-
able.
5. Press the button "on/off" key again, treadmill will stop, pull off the plug.
1.Install left and right column:
insert left and right column into
bottom connector, fixed it with
M8 screws.
2.Install tube of sencor meter:
Faxed the tube on the two col-
umns with M8 screws.(After install
electric meter,then tighten it.)
3.Install electronic meter:Insert
it on the tube of two columns,
then fixed it with M8 screws.
3
4.Strictly prohibit disassembly
before assemble is in the rough!
Fist backout the patch when you
use the treadmill!