background image

1. Safety regulations:

Attention: Read carefully this manual before using the machine.

·

The  treadmill  should  be  put  indoors,  keeping  it  free  from  moisture  and 

splashes of water. Don't put anything onto the machine.

·

During working sparks may occur in the electric motor. So keep the machine 

far from combustibles and exploder.

·

Make sure that four foots of the treadmill support the ground steadily . If nec-

essary, pad the machine with pieces of carpet or rubber.

·

Voltage should be within a range of 240v  volts, otherwise it may put the ma-

chine into disorder.

·

The plug must be well ground-connected, and the power lines can endure 

electric  currents  more  than  12  amperes.  While  the  treadmill  is  working.  It 

should be avoid to use other electrical appliances with the same power line.

·

Choose  suitable  sportswear  and  sports  shoes  for  exercise,  and  barefoot 

walking on the treadmill is forbidden. 

·

Only single user is allowed at same time .The person whose weight more 

than 100kg can't use ordinary type of the treadmill.

·

Stand on the plastic pad beside the running belt with hands holding the han-

dlebars,  then  start  the  machine,  and  begin  exercise  if  the  treadmill  works 

normally. Start the machine while standing on the belt is forbidden.

·

A person suffering from heart disease should not use the treadmill alone.

·

Adjust the running speed according to individual body state. A weak person 

should follow doctor's advice concerning exercise.

·

Continuous exercise time can not over 8 hour. Pull the plug off from a work-

ing treadmill so as to avoid accidents.

·

Don't make the treadmill to over work for long .Otherwise it may damage the 

motor  or  controller,  and  speed  up  the  aging  of  bearings,  running  belt  and 

running platform.

·

Keep the environment clean for that dust can lower the sensitivity of sensor 

for checking speed. 

·

Keep a proper air humidity indoors in winter to avoid static electricity which 

may influence the working of electronic meter or damage it.

2.Technical Standard:

·

Input voltage: 240v (50Hz or 60Hz)

·

Environment temperature for working: 0

+40°C.

·

Continuous Power : 3.5HP.

·

Electric current is less than 11A.

·

Speed :1.0-22.0 kilometers/hour(±5%)

·

Time limits:00:00-99:59(minute: second)

·

Valid area for running belt:135x50cm.

·

Distance :000-9.99 kilometers.

·

Slope: 0-22%

1

Содержание 3501










Отзывы: