York Fitness 52059, Руководство пользователя

Страница: 17 / 24

www.yorkfitness.com www.yorkfitness.com 17
If you have a problem with your exercise equipment, before you do anything else please
check that all the cables have been connected correctly. Loose cables are very common
and many problems can be solved by making sure the cables are properly connected.
The following table details the most common problems and how to fix them. If you still have a problem
after going through the troubleshooting guide please call your local YORK distributor for advice.
PROBLEM CAUSE CORRECTION
NO DISPLAY
No power Check power adapter
System halted
Unplug and re-plug the power cord
to reset the system
NO SPEED
DISPLAY
Wires are damaged or not
connected properly
Verify all wires are connected
properly
Speed sensor is too far from magnet Contact your local YORK distributor
PARTIAL DISPLAY The PA board is not connected
properly
Verify all wires are connected
properly
Disconnect and re-connect all
cables
Contact your local YORK distributor
NO PULSE
SIGNAL
Wires are damaged or not
connected properly
Verify all wires are connected
properly
Too much hand movement Dry palms
Palms too wet Grip using moderate pressure
Hand Pulse Sensor is being gripped
too tightly
Remove all rings
User is wearing rings Contact your local YORK distributor
ERROR CODE: E1 Hands are not hold on tightly on grips during BODY FAT test.
ERROR CODE: E4 Check the user’s age, height, weight figure setting when the test result is
out of the range of FAT% 5~50 and BMI 5~50%.
ERROR CODE: E5 Check the cable is well connected or connector broken.
FOR YOUR OWN SAFETY, DO NOT OPEN PROTECTIVE CASING. IF ERROR PERSIST,
PLEASE CONTACT YOUR LOCAL YORK DISTRIBUTOR FOR ADVICE. KEEP THE
EQUIPMENT OUT OF USE UNTIL IT IS REPAIRED.
If you are having problems with your heart rate reading, please note that some fibres used in
clothes eg) polyester, create static electricity that may prevent a reliable heart rate reading. Mobile
phones, TV’s, microwaves and other electrical appliances that generate an electromagnetic field
may also interfere with heart rate measurement.
Troubleshooting