SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
*
*
2.
ATTACH THE FRONT POST
Rest the front post on the main frame carefully as
shown.
Connect the sensor wire plug to the middle wire socket.
Check middle wire runs up the front post and out
the top - later this will connect to the computer.
Inset the front post into the main frame and secure,
using four hex head bolts, spring washers and
washers as shown.
NOTE: TAKE CARE to ensure the middle wire does not
get trapped when you attach the front post to
the main frame.
Make sure the tension cable comes out from the slot
of front post when you attach the front post to the
main frame.
Fix the plastic caps onto the bolts head.
X4
Attach the tension control to the front side of the front
post and secure using one machine screw and washer
from the rear side as shown.
A
FRONT
POST
B
FRONT
POST
MAIN FRAME
BRACKET
C
D
X4
PLASTIC
END CAP
X1
X1
FRONT
POST
CHECK
MIDDLE
WIRE
#8504-43
#8504-64 #8504-42
#8504-44
#8504-37
#8504-38