YoraHome SILVERBACK 6060 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 84

YoraHome SILVERBACK 6060 Скачать руководство пользователя страница 3

Safety

1/3

➔

Read and understand the entire user manual before attempting assembly or operation

➔

Do not use the CNC router for other than its intended use. If used for other purposes,
YoraHome disclaims any real or implied warranty and holds itself harmless from any injury
that may result from that use.

➔

Always wear approved safety glasses/face shield while using CNC router machine. Everyday
eyeglasses only have impact resistant lenses, they are not safety glasses

➔

Before operating CNC router, remove tie, rings, watches and other jewelry, and roll sleeves up
past the elbows.

➔

Do not wear loose clothing. Confine long hair. Non-slip footwear or anti-skid floor strips are
recommended. Do not wear gloves.

➔

Wear ear protectors (plugs or muffs) during extended periods of operation. Do not operate
CNC router while tired or under the influence of drugs, alcohol or any medication.

«
1
2
3
4
5
...
»

Содержание SILVERBACK 6060





















































































Отзывы:

Нет отзывов