Transistors
Step 8
•
We now solder the two NPN transistors into position.
•
Bend the component leads away from the body of the transistor. Note that
each transistor has its base lead bent in a different direction. Therefore it is
best to bend and then solder each transistor one at a time.
•
The leads on the transistors may be bent directly at the body.
Be careful to
do this ONCE!
Repeated bending of the leads will result in breaking the
component lead from the body of the transistor.
ASSEMBLY INSTRUCTIONS
RFLEGO Active Antenna Receiving Loop
page 29 of 66
