1. For channel to work correctly when remote is set to automatic mode, it has to be activated. If automatic mode is chosen
for the channel and the channel number is flashing, that means device cannot work in automatic mode. For activation press
and hold for a few seconds P2 programming button – channel number will stop flashing and from now on roller shutter will
work in automatic mode.
2. Difference between automatic time of roller shutter opening and closing cannot be shorter than 32 minutes. In case of
smaller than minimal time difference fault message will appear and none of the changes will be saved.
3. Pressing UP or DOWN button in any mode will show currently set opening/closing time and symbol of current process.
4. Estimated battery lifespan is 1 year if the device runs 4 commends a day in average.
5. Batteries should be changed when device stops reacting to commands.
6. When placing the battery ensure that polarity is correct.
7. Choosing ‘00’ group channel means remote controls all programmed devices on all channels at the same time. No
programming functions can be performed on group channel. All devices programmed to any other channel can be
controlled on group channel without additional programming.
8. For all the programmed devices on every channel to work automatically group channel ‘00’ should be chosen in
automatic mode.
Batteries contain substances that may be hazardous to health and may pollute the environment. Used batteries should
be disposed of properly.
ARTISTIC_1RT | ARTISTIC_5RT | ARTISTIC_15RT
In order to fully explore available functions of ARTISTIC series please take a moment and read this manual before using the device.
ARTISTIC transmitters are compatible with all YOODA brand devices.
Detailed description
www.sukcesgroup.pl
1.
Manual working mode:
normal working mode, without automatic opening/closing according to preset time.
2.
Automatic working mode:
normal working mode with automatic opening/closing according to preset time.
3.
Random working mode:
time controlled work with random opening/closing time (up to 15 minutes difference to preset
opening/closing time).
4. Working mode is changed for all channels of the device at the same time.
Changing work mode
Press
WORK MODE button
on the remote.
Manual working mode.
Automatic
working mode.
Random
working mode.
Press
WORK MODE button
on the remote.
Press
WORK MODE button
on the remote.
Every working mode
change results in
switching between
the modes.
Setting current time
1. Time can be set only when device is in manual working mode.
2. Longer than 10 seconds pause between series of button clicks during programming will cause device to switch off
from programming mode without saving any changes.
Using UP and DOWN
buttons set
current time.
Press
WORK MODE button
as many times
as it’s needed
to choose manual
working mode.
Press and hold
TIME SET button
for about 5 seconds.
Press
TIME SET button
to switch between
setting hour or minutes
of current time.
Press
TIME SET button
again to start the timer.
To save settings
press and hold
TIME SET button
for about 5 seconds
(elements on display
will stop flashing).
Current time flashes
on the screen.
Current time
was successfully
changed.
KONIEC
ZMIANY
