6
1. Longer than 4 seconds pause between series of button clicks during programming will cause device to switch off from
programming mode without saving any changes.
2. Deleting transmitters causes removing limited positions.
13. Deleting all transmitters
Press programming button P2
on the A remote control.
Remote control
has been programmed.
The roller shutter
will make
a short up/down
movement.
The roller shutter
will make
a short up/down
movement.
The roller shutter
will make a longer
up/down movement.
Press
programming button P2
on the A remote control.
Press
programming button P2
on the B remote control.
The roller shutter will make
a short up/down movement.
The roller shutter
will make a short
up/down movement.
The roller shutter
will make a longer
up/down movement.
Press
STOP button.
Press
programming
button P2.
Press programming button P2
on the remote control.
All transmitters
have been removed.
1. Longer than 4 seconds pause between series of button clicks during programming will cause device to switch off from
programming mode without saving any changes.
2. When the impulse mode is on, pressing the direction button, motor will make a short move.
1. When programming key-ring remotes that do not have additional P2 programming button the same function is
substituted with simultaneous push of STOP and UP buttons.
2. Longer than 4 seconds pause between series of button clicks during programming will cause device to switch off from
programming mode without saving any changes.
14. Activating impulse mode
The roller shutter
will make a short
up/down movement.
Press
programming button P2
on the remote control.
If the motor will make two longer
up/down movement,
THE IMPULSE MODE IS ON.
If the motor will make a longer
up/down movement,
THE IMPULSE MODE IS OFF.
Press
UP button.
Press
DOWN button.
The roller shutter
will make a short
up/down movement.
15. Programming key-ring remotes
Turn on power supply
or press programming
button on motors head
when power is on.
The roller
shutter will
make a longer
up/down
movement.
The roller
shutter will
make a short
up/down
movement.
The roller
shutter will
make a short
up/down
movement.
Press simultaneously
STOP and UP
buttons.
Press simultaneously
STOP and UP
buttons.
Pilot brelok
został zaprogramowany.
The roller shutter will make
a longer up/down
movement.
Press
UP button.