1. After setting the upper and lower limit positions, it is possible to set the third position (favorite) between those positions.
2. Hold the STOP button for 3 seconds to set the blind in third limit position.
9. Programming the third limit position
5
When the roller shutter
reaches lower limit position
press STOP button.
Limit positions
has been
programmed.
Press STOP button
5 times at 1 sec
intervals to confirm
the upper limit position.
Press STOP button
5 times at 1 sec
intervals to confirm
the lower limit position.
Press
DOWN button.
The roller shutter will
make a longer
up/down movement.
The roller shutter will
make a longer
up/down movement.
Press
STOP button.
The roller shutter will
make a short
up/down movement.
Upper limit position
has been set.
The third
limit position.
Lower limit position
has been set.
Limit positons have been
removed.
The third limit positon
has been set.
Press
STOP button.
The roller shutter will
make a short
up/down movement.
The roller shutter will
make a longer
up/down movement.
Set the blind
in favourite position.
10. Removing third limit position
11. Removing limit positions
The roller shutter will make
a short up/down movement.
The roller shutter will make
a short up/down movement.
The roller shutter will make
a longer up/down movement.
Press
DOWN button.
Press
programming
button P2.
Press
programming
button P2.
1. Receiver can be controlled by up to 20 transmitters.
2. Longer than 4 seconds pause between series of button clicks during programming will cause device to switch off from
programming mode without saving any changes.
12. Programming another transmitter
Press
programming
button P2.
The third limit positon has
been removed.
Press
STOP button.
The roller shutter will
make a short
up/down movement.
Press
STOP button.
The roller shutter will
make a short
up/down movement.
The roller shutter will
make 2 longer up /
down movements.
Press
programming
button P2.
