ENGLISH
O P E R AT I O N _____________________________________________________
This unit comes with a Liquid Crystal Display (LCD) screen that shows the total operation time of 2
minutes (120s) for each speed setting selected. To use:
Place the food to be blended into the jar and put the lid on the jar before blending. (See Fig.6)
Be sure the cap is in place.
When crushing ice or hard food, keep one hand on the lid.
Note : The mixture in the jar never exceed the max capacity of jar (1200ml)
Plug in the unit, press the key POWER, a beep sound is heard, the LCD comes on and displays “00”. (See
1.
“CONTROL PANEL”) The indicator of POWER key blinks and other indicators of three keys are illuminated.
And the default function is MIX, namely the indicator of MIX is lighting.
Press the key FUNCTION consecutively to select the speed setting you want. MIX(1), CHOP(2), BLENDER(3),
2.
LIQUIFY(4), PUREE(5)or ICE CRUSH. The light of selected setting is illuminated on the control panel and
the LCD displays the total operation time of 2 minutes for each setting.
Press the key START/CANCEL to start the unit and the START/CANCEL key begins blinking.
3.
The POWER key stops blinking and becomes illuminated, the LCD will count down.
Note : During operation, you can press and hold PULSE button at any time to achieve the highest speed.
Once the time has run, namely the operation has completed, beeps will be
4.
heard, the appliance will stop automatically, namely the POWER key turns to
blink,
and
the
START/CANCEL
key
stops
blinking
and
becomes
illuminated.
Note : during operation, if desired effect has obtained, you can press the START/CANCEL key to stop
operating. The POWER key will blink and the START/CANCEL key stops blinking and becomes illuminated.
After use, Press the POWER key to disconnect the unit from the mains supply.
5.
Note : Minimum 1 minutes rest period is required between two consecutive cycles.
I M P O RTA N T O P E R AT I N G T I P S ______________________________________
For quick or delicate blending tasks, use the PULSE key for
•
a few seconds, then release. For best result when crushing
ice, use the ICE CRUSH setting.
If you want to add ingredients while the blender is on, remove
•
the cap and place through the lid opening. (See Fig.7)
To remove the jar assembly, unlock it from the motor unit
•
in the direction as shown in Fig.5. Remove the lid before
pouring.
