Hinweis: Die Installationsmethode des
Schlagschraubers hängt von der Art der
Vierkantschraube des Werkzeugs ab.
Installieren oder entfernen sie den
steckschlüssel / schraubendreher
①
Schlaghülse
②
Vierkant-Übertragungsstange
③
Ringfeder
Drücken Sie die Schlaghülse auf die Vierkantschraube,
bis sie einrastet. Bei der Demontage der Schlaghülse
ziehen Sie diese einfach ab.
①
Schlaghülse
②
O-Ring
③
Stift
Entfernen Sie den O-Ring aus der Nut der Schlaghülse.
Entfernen Sie den Stift an der Schlaghülse. Platzieren
Sie die Schlaghülse auf der Vierkantschraube. Richten
Sie das Loch in der Schlaghülse mit dem Loch in der
Vierkantschraube aus.
Führen Sie den Stift durch das Loch in der Schlaghülse
und die Vierkantschraube und bewegen Sie dann den
O-Ring zurück in seine ursprüngliche Position in der
Nut der Schlaghülse, um den Stift zu sichern.
Wenn Sie die Schlaghülse entfernen müssen, befolgen
Sie bitte die umgekehrten Installationsschritte.
Schlaghülse ohne o-ring und stift
Schlaghülse mit O-Ring und Stift
10
DE