Note:
Depending on usage conditions and ambient
temperature, the indicated value may differ slightly
from the actual capacity.
75% to 100%
50% to 75% 25% to 50%
Model:
MK-21V
Voltage:
21V
Rated
power:
200W~800W
No-load
speed:
13000/20000/24000r/min
Net weight:
0.56kg
Electric drill host specifications
Battery
capacity:
Charging
time:
Charging
adapter
1500mAh*10pcs, 2 batteries
2-3H
100V~240V,50~60Hz
Note: The battery pack must be removed before
operation, and it is absolutely prohibited to press the
switch button!
①
To install the conversion head, first place the locking
push button at the unlocking mark (Picture 1), extend
it parallel to the introduction groove and insert it into
the bottom of the main unit (Picture 2), and then push
the locking push button in the locking direction
(Picture 3).
②
Remove the converter head, place the locking push
button at the unlock mark (Figure 1), and pull out the
converter head.
1. Speed gear adjustment. Use the function switching
button to select high, medium or low motor speed
according to the actual situation.
2. Remaining power display
Speed
adjustment
Battery display
indicator light
Drill chuck: 10mm
Maximum
torque:
No-load
speed:
32N.m
High (2) 0-1450r/min low (1) 0-400r/min
Net weight: 0.43kg
Specification
Install or remove the
conversion head
* The speed of the machine will increase as the pressure
on the switch button increases, and the machine will
stop when the switch button is released.
* Forward and reverse rotation switch, push it to the left,
the drill bit will rotate clockwise; push it to the right, it
will rotate counterclockwise, and it will be locked in the
middle.
Operation of the switch
Intelligent control panel
Switch/function
switching
High
Medium
Low
Product description
lock
Lock push button
Switch
Smart control panel
(
Electric drill host
)
Unlock
Positive and
negative buttons
(
Two-speed
electric drill adapter
)
(
Dual purpose
wrench adapter
)
Two-speed electric
drill adapter
03
EN
Battery specifications
