-14-
●
Securely mount air hose attachments.
Disconnection of the air hose could cause it to fly about
due to air jet, thus inducing an imminently hazardous
situation. To avoid that, securely mount the air hose
attachment to the air hose and the pneumatic tool,
respectively.
●
Be careful with dust contamination when connecting
air hose.
Please be sure to do air blow until dust and drain are gone
when connecting air hose with a tool. Also, please be sure
to remove dust on the connecting part of air hose.
●
Securely fix workpiece.
If workpiece is not securely fixed, it could fly to cause
personal injury. To avoid that, securely fix workpiece to
work.
●
Do not bring your hand or a cloth close to moving part.
Since the pneumatic tool is in imminent danger while in
use, NEVER bring your hand or a cloth to the moving part
of the pneumatic tool.
●
Do not bring the pneumatic tool into contact with
electricity.
Since the pneumatic tool is not designed to isolate from
electrical contact, use it with careful attention paid not to
bring it into contact with electricity.
●
Avoid sudden startup.
To connect an air hose to the pneumatic tool, check to be
sure that the START switch is set to OFF. In addition, to
carry the pneumatic tool, do not put your hand on the
START switch.
●
Pay utmost care to the direction of exhaust air.
When the pneumatic tool is operated, oil mist is coming up.
Furthermore, as the foreign particles etc., may be exhausted
from inside air compressor or air piping, use the pneumatic
tool with utmost care paid to the direction of exhaust air so
that your eye or ear will not be directly exposed to it.
