Yokota G400H-S, Инструкция по эксплуатации

Страница: 29 / 52

-27-
■ Application and use other than specified in the safety
rules in your country may cause a serious accident.
Please read thoroughly the following instructions and
fully understand them to use our tools correctly
before the operation.
■ When using the cutting wheel, please use the wheel
cover for cutting wheel. (option)
■ Cautions before use:
● A wheel cover must be installed on the air grinder when
the grindstone to be used with, has maximum diameter of
50mm or more.
● Make sure the grinder works properly in a safe place through
one minute trial run before daily use and three minutes trial
run whenever grinding end attachment is exchanged.
● Confirm that the specified size of grindstone for the speci-
fied peripheral speed to meet the specification of the
grinder, is installed on the tool. Refer to the conversion
chart of the peripheral speed in the next page to install the
proper grinding end attachment surely according to the
specified number of rotation (rpm) and peripheral speed
described on the grinder main body as well as on the
wheel cover.
● Do not apply the side face of the grinding attachment
(grindstone) , unless specially designed to do so.
WARNING
WARNING
The air grinders are hand-held abrasive tools for the use of grinding and
polishing with grindstone and other attachment.
Warnings and cautions for safe use of pneumatic grinders