YOKOGAWA WT1800E Скачать руководство пользователя страница 21

Страница: 21 / 154

1-10

IM WT18O1E-02EN

Setting the Valid Current Measurement Range (Current Range

Configuration)

Press the current range’s

CONFIG

key to display the following menu.

Set the valid measurement ranges of the 50 A input element.

Set the valid measurement ranges of the 5 A input element.

Set the valid measurement ranges of the external current sensor.

Direct input range

Setting the Valid Measurement Range of 50 A Input Elements (50A

Input Element)—Direct Input Range

Valid measurement range

• The measurement range switches (in order) between the ranges whose check boxes

are selected.

• Ranges whose check boxes are not selected are skipped.

• When Element Independent (see section 1.9) is set to OFF, the input elements that are

assigned to the same wiring unit are set to the same status.

If the measurement range to switch to when a peak over-range occurs

has been selected, the range background is displayed in yellow.

For each input element or wiring unit,

you can set all ranges as valid

measurement ranges (All ON).

Available options for the measurement

ranges that this instrument can switch

to when a peak over-range occurs

For each range, you can

set whether the range is a

valid measurement range

for all input elements (All

ON) or not (All OFF).

Slot in which a 50 A input element is not

installed

Measurement range to switch to when a peak over-range occurs

• When Element Independent is set to OFF, the input elements that are

assigned to the same wiring unit are set to the same range.

• If auto range is on (you can turn it on by pressing AUTO), this instrument

operates as follows:

• When a peak over-range occurs, the measurement range increases to the

range specified here, skipping the ranges in between.

• When the measurement range to switch to when a peak over-range occurs

is set to OFF, the measurement range increases in the order specified by

the measurement ranges whose check boxes have been selected.

Available current range options

1.7 Setting the Valid Measurement Range

Содержание WT1800E



























































































































































Результаты поиска

Содержание WT1800E

Отзывы:

YOKOGAWA WT1800E, Руководство пользователя, Страница: 21 / 154

Результаты поиска

Содержание WT1800E

Отзывы: