YOKOGAWA WT1800E Скачать руководство пользователя страница 147

Страница: 147 / 154

App-2

IM WT18O1E-02EN

Setup Error Messages (500 to 899)

Code

Message

Chapter or Section

600

File access failure.

—

601

Invalid file name.

Check the file name.

17.2

602, 603

No USB device or no storage media inserted.

Check the USB device connection, and the existance of a storage medium in the drive.

17.1

604

Media failure.

Check the storage medium.

17.1

605

File not found.

Check the filename and the storage medium.

—

606

Media is protected.

Set the disk’s(medium’s) write protect switch to OFF.

—

607

Media was removed while accessing.

Check the storage medium.

17.1

608, 609

File already exists.

—

610

Contains invalid characters.

17.2

611, 612

Media full.

Delete unnecessary file(s) or use another disk.

17.6

613

Cannot delete a directory if there are files in the directory.

17.6

614

File is protected.

—

615

Physical format error.

Reformat the medium. If the same error occurs, the instrument is probably unable to

execute a format on this medium.

—

616 to 620,

622 to 641

File system failure.

Check using another disk. If the same message still appears, maintenance service is

required.

—

621

File is damaged.

Check the file.

—

643 to 653

Media failure.

Check the medium.

—

657

File operation is interrupted.

—

658

File unknown format.

Check the file format.

17.5 and 17.6

662

Cannot load this bitmap file.

Use file of 16bit Color or 24bit Color Mode with less or equal size 800x672.

6.7

663

Cannot load this text file.

Confirm the contents of file.

6.7

665

Cannot load this file format.

File was stored on other models or other versions.

—

666

File is now being accessed.

Execute after access is made.

—

675

Cannot load this file.

Model/options do not conform.

—

676

Writing prohibited in this file.

—

677

An error occurred while network access.

Confirm network conditions.

Chapter 20

679

Printer error.

Maintenance service is required.

—

680

Close the printer cover.

19.1

681

Paper empty.

Load a roll chart.

19.1

682

The printer head temperature is abnormality.

Printing will be aborted.

Printing will not be possible until the printe head temperature comes normal.

—

683

Printer over heat.

Power off immediately.

—

685

Printer time out.

Maintenance service is required.

—

686

Printer error.

—

690

Cannot execute for the directory depth is 10 or more.

—

691

Cannot execute because of source and destination are overrapped.

—

Appendix 1 Messages and Corrective Actions

Содержание WT1800E



























































































































































Результаты поиска

Содержание WT1800E

Отзывы:

YOKOGAWA WT1800E, Руководство пользователя, Страница: 147 / 154

Результаты поиска

Содержание WT1800E

Отзывы: