YOKOGAWA WT1600FC Скачать руководство пользователя страница 39

Страница: 39 / 163

Commands

5-3

IM 760151-17E

Command

Function

Page

:FILE:FORMat

Executes the floppy disk format.

5-29

:FILE:FREE?

Queries the free space on the target drive.

5-29

:FILE:LOAD:ABORt

Aborts file loading.

5-29

:FILE:LOAD:FGWave

Loads the pattern waveform file of the load current for impedance measurement.

5-30

:FILE:LOAD:SETup

Loads the setup parameter file.

5-30

:FILE:MDIRectory

Creates the directory.

5-30

:FILE:PATH?

Queries the absolute path of the current directory.

5-30

:FILE:SAVE?

Queries all settings related to the saving of files.

5-30

:FILE:SAVE:ABORt

Aborts file saving.

5-30

:FILE:SAVE:ANAMing

Sets whether to automatically name the files to be saved or queries the

current setting.

5-30

:FILE:SAVE:COMMent

Sets the comment to be added to the file to be saved or queries the

current setting.

5-30

:FILE:SAVE:NUMeric?

Queries all settings related to the saving of numeric data files.

5-30

:FILE:SAVE:NUMeric[:EXECute]

Saves the numeric data file.

5-30

:FILE:SAVE:NUMeric:NORMal?

Queries all settings related to the saving of numeric data files for power

measurement.

5-31

:FILE:SAVE:NUMeric:NORMal:ALL

Collectively turns ON/OFF the output of all elements and functions when

saving the numeric data file during power measurement.

5-31

:FILE:SAVE:NUMeric:NORMal:{ELEMent<x>|SIGMA|SIGMB|SIGMC}

Turns ON/OFF the output of the {element|

C} when saving

the numeric data list to a file during power measurement or queries the

current setting.

5-31

:FILE:SAVE:NUMeric:NORMal:PRESet<x>

Presets the output ON/OFF pattern of the element and function when

saving the numeric data to a file during power measurement.

5-31

:FILE:SAVE:NUMeric:NORMal:<power measurement function>

Turns ON/OFF the output of the function when saving the numeric data

file during power measurement or queries the current setting.

5-31

:FILE:SAVE:NUMeric:TYPE

Sets the format of the numeric data to be saved or queries the current setting. 5-32

:FILE:SAVE:SETup[:EXECute]

Executes the saving of the setup parameter file.

5-32

:FILE:SAVE:WAVE?

Queries all settings related to the saving of waveform display data files.

5-32

:FILE:SAVE:WAVE[:EXECute]

Executes the saving of the waveform display data file.

5-32

:FILE:SAVE:WAVE:TRACe

Sets the waveform to be saved to a file or queries the current setting.

5-32

:FILE:SAVE:WAVE:TYPE

Sets the format of the waveform display data to be saved or queries the

current setting.

5-32

HCOPy Group

:HCOPy?

Queries all settings related to the output of screen image data.

5-34

:HCOPy:ABORt

Aborts screen image data output and paper feeding.

5-34

:HCOPy:BMP?

Queries all settings related to the BMP format.

5-34

:HCOPy:BMP:COLor

Sets the color tone for the BMP format or queries the current setting.

5-34

:HCOPy:BMP:COMPression

Sets the data compression for the BMP format or queries the current setting. 5-34

:HCOPy:COMMent

Sets the comment displayed at the bottom of the screen or queries the

current setting.

5-35

:HCOPy:DIRection

Sets the output destination of the screen image data or queries the

current setting.

5-35

:HCOPy:EXECute

Executes the screen image data output.

5-35

:HCOPy:FORMat

Sets the file format of the screen image data to be saved or queries the

current setting.

5-35

:HCOPy:PRINter?

Queries all settings related to the built-in printer output.

5-35

:HCOPy:PRINter:DLISt?

Queries all settings related to the printing of the numeric data list using

the built-in printer.

5-35

:HCOPy:PRINter:DLISt[:EXECute]

Executes the printing of the numeric data list using the built-in printer.

5-35

:HCOPy:PRINter:DLISt:INFOrmation

Sets whether or not to add setup parameters when printing the numeric

data list using the built-in printer or queries the current setting.

5-35

5.1 Command List

Содержание WT1600FC




































































































































































Результаты поиска

Содержание WT1600FC

Отзывы:

YOKOGAWA WT1600FC, Руководство пользователя, Страница: 39 / 163

Результаты поиска

Содержание WT1600FC

Отзывы: