1-3
IM 707231-01E
Functions
1
1.2
Operation Panel
The WE7000 Control Software installed in the PC is used to control the 30-CH Fast
Digital Thermometer WE7231. The WE7000 Control Software displays operation panels
similar to those shown in the figure below. This user’s manual does not explain the
operations of the operation panel or waveform monitor. For these operations, see the
WE7000 Control Software’s online help.
Basic Settings
Start/stop measurement
Select the sampling interval
Turn the waveform monitor
ON and OFF
Display the Table Entry
window (see next page)
Select for automatic burn out detection
Execute burn out detection
Display settings for
channels 16-30
Select the measurement function
Select the measuring range/type of thermocouple
Select the reference channel
(for difference between channels
calculation)
Execute NULL measurement
on channels set to use the null value
Alarm occurrence
status indication
Select to put the alarm occurrence status indication on hold
Click to release alarm occurrence status indication hold
Burn out detection indicator
Other Settings
Select the measurement channel
Select to calculate the difference from the reference channel
Select to use the NULL value
Toggle the reference junction compensation (RJC)
between Internal and External
Input the reference junction temperature for
external reference junction compensation (RJC)
Select the units of temperature
Select the time base
Select to enable fast scan mode
Select to use the moving average as the measured values
Set the number of samples for the moving average
Set alarm detection by group
Set alarms for the measurement channels
