YOKOGAWA UP350, Инструкция по эксплуатации, Страница: 41 / 96

<Toc> <3. Programming>
3-13
IM 05E01D02-41E 1st Edition : May 31,2000-00
●
Program-2 Parameters
Parameter
Symbol
Name of
Parameter
Setting Range and Description Initial Value Target Item
in CD-ROM User
Setting
PV event-1 type OFF, 1 to 10
1: PV high limit (energized, no stand-by action)
2: PV low limit (energized, no stand-by action)
3: Deviation high limit (energized, no stand-by action)
4: Deviation low limit (energized, no stand-by action)
5: Deviation high limit (de-energized, no stand-by action)
6: Deviation low limit (de-energized, no stand-by action)
7: Deviation high and low limits (energized, no stand-by action)
8: Deviation within high and low limits (energized, no stand-by action)
9: PV high limit (de-energized, no stand-by action)
10: PV low limit (de-energized, no stand-by action) OFF
PV event-1 setpoint PV alarm: -100.0 to 100.0% of PV input range
Deviation alarm: -100.0 to 100.0% of PV input range span PV high limit:
0.0% of PV
input range.
Deviation alarm:
0.0% of PV
input range span.
Other PV alarms:
0.0% of PV
input range.
PV event-2 setpoint PV alarm: -100.0 to 100.0% of PV input range
Deviation alarm: -100.0 to 100.0% of PV input range span PV high limit:
0.0% of PV
input range.
Deviation alarm:
0.0% of PV
input range span.
Other PV alarms:
0.0% of PV
input range.
PV event-2 type OFF, 1 to 10
1: PV high limit (energized, no stand-by action)
2: PV low limit (energized, no stand-by action)
3: Deviation high limit (energized, no stand-by action)
4: Deviation low limit (energized, no stand-by action)
5: Deviation high limit (de-energized, no stand-by action)
6: Deviation low limit (de-energized, no stand-by action)
7: Deviation high and low limits (energized, no stand-by action)
8: Deviation within high and low limits (energized, no stand-by action)
9: PV high limit (de-energized, no stand-by action)
10: PV low limit (de-energized, no stand-by action) OFF
Ref.3.4(5)
Ref.3.4(6)
Ref.5.2(1)
Ref.5.1(1)
On time of
Time Event OFF, 0.00 to 99.59 (hour and minute or minute and second)
Use the TMU setup parameter to set the time unit. The time
unit is the same as that of the program. OFF
OFF, 0.00 to 99.59 (hour and minute or minute and second)
Use the setup parameter TMU to set the time unit.
The time unit is the same as that of the program. OFF Off tme of
Time Event
Starting target
setpoint 0.0 to 100.0% of PV input range 0.0% of PV
input range
0.0% of PV
input range
Start code 0: Operation begins with the starting target setpoint (2.SSP).
1: Ramp-prioritized PV start
2: Time-prioritized PV start
Segment-1
target setpoint 0.0 to 100.0% of PV input range
Segment-1
segment time OFF, 0.00 to 99.59 (hour and minute or minute and second)
Ramp setting: OFF, 0.0 to 100.0% of PV input range span
(1 hr or 1 min.)
Use the TMU setup parameter to set the time unit.
The “ hour and minute” option in ramp setting means “per hour”
and the “minute and second” option means “per minute.” OFF
0
(2.AL1)
(2.A1)
(2.AL2)
(2.A2)
(2.EON)
(2.EOF)
(2.SSP)
(2.STC)
(2.SP1)
(2.TM1)