YOKOGAWA TC 10-L, Инструкция по эксплуатации

Страница: 19 / 20

Yokogawa Electric Corporation - TC10 -L - ENGINEERING MANUAL - PAG. 19
N Param. Description Range value or selection list elements
Decimal
fi gure
37 SPLL Minimum set point value -1999 to SPHL ( E.U.) dP
38 SP.HL Maximum set point value SPLL to 9999 (E.U.) dP
39 SP Set point SPLL to SPHL dP
40 dis The way to confirming operation
but = by keyboard (button)
di = by digital input
41 tim
Duration time when in exceeded (in
shoutdown)
00.00 to 99.59 (HH.mm) 0
42 Hi Maximum measured value In Engineering Units dP
43 Lo Minimum measured value In Engineering Units dP
PAn Group
N Param. Description Range value or selection list elements
Decimal
fi gure
44 PAS2 Password level 2 0 (oFF) to 200 0
45 PAS3 Password level 3 3 to 200 0
46 di.CL Display color
0 = The display color is used to show the Exceeded condition.
1 = fixed red display
2 = fixed green display
3 = fixed amber display
0
47 diS.t Display time-out 0 (OFF) to 99.59 (mm.ss) 2
SEr group
N Param. Description Range value or selection list elements
Decimal
fi gure
48 Add Address 0 (oFF) to 254 0
49 bAud Baud rate
1200
2400
9600
19.2
38.4
CAL group
N Param. Description Range value or selection list elements
Decimal
fi gure
50 A.L.P Adjust low Point -1999 to A.H.P-10 (E.U.) dP
51 A.L.o Adjust low Offset -300 to 300 (E.U.) dP
52 A.H.P Adjust High Point A.L.P +10 to 9999 (E.U.) dP
53 A.H.o Adjust High Offset -300 to 300 (E.U.) dP