6
TI 01W06A51-50EN
3.2
Mounting the LTE Antennas
By inserting a SIM card into the gateway, Sushi Sensor data can be directly transferred to the
application on the Internet via an LTE network.
Even if LTE are not used, the two LTE antennas must be mounted to protect the connectors.
(1) Prepare the LTE antennas. “LTE” is indicated on the side of each antenna.
(2) Connect either of the LTE antennas to antenna connector “5” at the bottom of the gateway.
(3) Connect the other LTE antenna to antenna connector “6” at the bottom of the gateway.
(4) Use a tightening torque of 2 to 3 N•m to mount the antennas.
3.3
Inserting a SIM Card
When using LTE communications via the gateway, insert a SIM card. If you do not use LTE
communications, skip the procedure described below.
(1) Remove the SIM/USB cover at the bottom of the gateway. The SIM card slot is located on
top of the USB port.
(2) Orient the SIM card so that the cut-off notch in the corner comes to the front right, and insert
the SIM card into the slot. When the card clicks into place, it has been inserted correctly.
(3) Mount the SIM/USB cover. The tightening torque for the SIM/USB cover is 1.18 N•m.
Figure 3-3 Gateway with a SIM card inserted
Mar.26,2019-00