1
TI 01W06A51-50EN
Mar.26,2019-00
Introduction
This document describes how to install and set up a LoRaWAN gateway to be used in a Sushi
Sensor system.
This document is intended for systems in which MultiConnect Conduit IP67 Base Station
manufactured by Multi-Tech Systems is used as a LoRaWAN gateway (hereinafter referred to as
“gateway”).
This document does not contain any information related to services.
Notes Regarding this Document
• This document is intended for firmware version 1.6.4 of MultiConnect Conduit IP67 Base
Station manufactured by Multi-Tech Systems. When the version is upgraded, the screen
layout and setup procedures may be changed from those of the previous version.
• The contents of this manual are subject to change without prior notice.
• All rights reserved. No part of this manual may be reproduced in any form without
Yokogawa’s written permission.
• If any question arises or errors are found, or if any information is missing from this manual,
please inform the nearest Yokogawa sales office.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury or physical damage.It may also be used to alert against unsafe practices.
IMPORTANT
Indicates that operating the hardware or software in this manner may damage it or lead to
system failure.
NOTE
Draws attention to information essential for understanding the operation and features.
All Rights Reserved, Copyright © 2019, Yokogawa Electric Corporation