YOKOGAWA STARDOM FCN-500 Скачать руководство пользователя страница 9

Страница: 9 / 226

<1. Overview>

TI 34P02K35-02E Jun. 6, 2018-00

1. Overview

STARDOM engineering can be divided into phases as shown in the diagram

below.

Check require-

ment spec.

User acceptance

test (UAT)

System delivery

Unit test

Integration test

System test

Detailed function

design of

application

software

Check requirement

spec.

Check system

configuration

- Verify that the requirement specification can be implemented using

the STARDOM system.

- Verify that the system configuration allows implementation of the

requirement specification.

- Based on the requirement specification, prepare basic specifications

for FCN/FCJ control applications, operation/monitoring applications

and communication functions.

- Based on basic functions, perform detailed design of each

application and prepare functional specification.

- Based on function specification, create applications.

- In unit test, check individual applications.

- In integration test, combine applications already tested in unit tests

and test the integrated STARDOM system as a whole.

- In system test, combine external equipment and control panels with

the STARDOM system, and perform function test, including

communication tests.

- Verify along with customer that the designed/created application

satisfies the function specification.

- After completion of UAT, deliver STARDOM system.

FCN/FCJ control

applications

Operation and

monitoring

applications

Communication

applications

Basic design and function design

Application creation

Function test

This engineering guide is intended as a guide for system engineering of a

STARDOM system based on given specifications. For this purpose, it describes

the precautions and checklist for each of the engineering phases after

specifications are confirmed, including basic design and function design,

application creation, function test, user acceptance test (UAT) and system

delivery.

This engineering guide focuses on FCN/FCJ control applications.

Details on the functions and use of the FCN-500 and FCN-RTU controller and

individual application programming tools can be found in their respective

instruction manuals (IM) and Technical Information (TI). Wherever necessary, this

manual will refer the reader to these documents for details on functions and

usage.

Содержание STARDOM FCN-500



































































































































































































































Результаты поиска

Содержание STARDOM FCN-500

Отзывы:

Бренды по названию

Популярные бренды

YOKOGAWA STARDOM FCN-500, Инструкция по эксплуатации

Результаты поиска

Содержание STARDOM FCN-500

Отзывы:

Бренды по названию

Популярные бренды