background image

System Overview ProSafe-COM 3.00 

 

37 of 49 

 

5.4  ProSafe-PLC forcing statuses 

ProSafe-PLC has software facilities to enable forcing statuses.

 

The Fail-safe enable is typically connected to an input channel of a CDM. This input will typically be linked 
to logic in the CCM (basically a logical AND gate) to which also the override output from the ProSafe-COM 
is connected (originating from external communication lines)

 

The CCM is connected to the M-BUS and receives write commands from the ProSafe-COM. The following 
picture gives an impression: 
 
 

ProSafe-COM 

 

Figure 26: Override facility in ProSafe-PLC 

 
 

5.5  Status acquisition on Y-net 

In a Y-net configuration the status of the ProSafe-SLS can be scanned at regular time intervals. 

 

 

Five different kinds of status data can be collected:

 

 

  Digital input data 

The digital input module (MC-573) performs Digital data acquisition.

 

  Digital output data 

The digital output module (MC-576) executes write commands.

 

  Analogue input data 

The analogue input module (MC-562) will perform the Analogue status acquisition.

 

  Matrix panel input 

The matrix panel input controller (MI-983) reads operator’s input.

 

 Matrix panel output 

The matrix panel output controller (MO-986) sets lamp outputs.

 

 

This paragraph describes some more details of this mechanism for the ProSafe-SLS safety system.

 

 

Each Y-net can support maximally 120 ProSafe-SLS or matrix panel control modules. ProSafe-COM 
scans all Y-net modules through the Y-net. 

All Rights Reserved. 

©

 Copyright Yokogawa Europe Solutions B.V. 

TI48J01A00-00E Oct 2010 

 

Содержание ProSafe-COM


















































Отзывы: