YOKOGAWA MV100 Скачать руководство пользователя страница 2

Страница: 2 / 20

IM MV100-17E

Disk No. RE25

4th Edition: February 2002(YK)

Forward

Thank you for purchasing the YOKOGAWA MobileCorder MV100/MV200.

This Communication Interface User’s Manual contains information about the Ethernet/

serial interface communication functions. To ensure correct use, please read this

manual thoroughly before operation.

Keep this manual in a safe place for quick reference in the event a question arises.

The following five manuals, including this one, are provided as manuals for the MV100/

MV200.

Manual Name

Manual No.

Description

MV100 User’s Manual

IM MV100-01E

Explains all functions and procedures of
the MV100 excluding the communication
functions.

MV200 User’s Manual

IM MV200-01E

Explains all functions and procedures of
the MV200 excluding the communication
functions.

MV100/MV200

IM MV100-17E

This manual. Explains the

Communication

communication functions of the Ethernet/

Interface

serial interface.

Fieldbus

IM 04L02A01-18E

Explains the communication functions

Communication

of the FOUNDATION Fieldbus interface.

Interface

For models with /CF1.

DAQSTANDARD

IM 04L02A01-61E

Describes the functions and operating
procedures of DAQSTANDARD.

Notes

•

This manual describes the communication function of the MV100/MV200 with the

style number “S4.”

•

The contents of this manual are subject to change without prior notice as a result of

continuing improvements to the instrument’s performance and functions. The figures

given in this manual may differ from the actual screen.

•

Every effort has been made in the preparation of this manual to ensure the accuracy

of its contents. However, should you have any questions or find any errors, please

contact your nearest YOKOGAWA dealer as listed on the back cover of this manual.

•

Copying or reproducing all or any part of the contents of this manual without

YOKOGAWA’s permission is strictly prohibited.

•

The TCP/IP software used in this product and the documentation for that TCP/IP

software are based in part on BSD Networking Software, Release 1 licensed from The

Regents of the University of California.

Trademarks

•

Microsoft, MS-DOS, Windows, and Windows NT are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.

•

Modbus is a registered trademark of AEG Schneider Automation Incorporated.

•

Adobe and Acrobat are trademarks of Adobe Systems incorporated.

•

Other company and product names are trademarks or registered trademarks of their

respective holders.

Revisions

•

First edition:

March 2000

•

Fouth edition: February 2002

•

Second edition:

September 2000

•

Third edition:

February 2001

Содержание MV100





















Результаты поиска

Содержание MV100

Отзывы:

Похожие инструкции для MV100

Бренды по названию

Популярные бренды

YOKOGAWA MV100, Руководство пользователя

Результаты поиска

Содержание MV100

Отзывы:

Похожие инструкции для MV100

Бренды по названию

Популярные бренды