YOKOGAWA GRVSW-660FA, Техническая информация

Страница: 37 / 74

4. Configuration Setup
4-4
TI 30A10A30-01E
The Command Line Interface supports following functions.

Command input assistant function
Once enough letters are entered to uniquely identify a command name, press the “Tab” key to let
the system complete the rest of the command name.

Command/Parameters list choices display function
When a question mark “?” is entered, a list of possible command keywords or parameters is
displayed. By entering “?” as the parameter for a command, a list of the parameters available
and those descriptions are displayed. By entering “?” as the CLI prompt, a list of the commands
available and those descriptions are displayed.

Command history buffer function
Command lines that are executed in the past can be stored into the history buffer of the device.
These command lines can be reused.
• Entering “Ctrl”+“P”, go to previous line in history buffer.
• Entering “Ctrl”+“N”, go to next line in history buffer.
Up/Down cursor keys can be used instead of entering “Ctrl”+“P”/“N,” which is useful in repeating
a simple command set.

Text input function
A group of sequential commands can be input by using paste function of a text editor, which is
useful to set up the configuration by using a template text file prepared for a particular network
application.
The command entry buffer cannot accept too many command lines at a time.
For to use this function, set the transmit delay time to 1 msec/char on the serial port setup
window of the terminal software, and confirm if all the pasted commands are executed
completely.
Sep. 19, 2014-01