YOKOGAWA FG400, Руководство пользователя

Страница: 54 / 171

42
4.
BASIC OPERATION
IM FG410-01EN
• Return to previous setting [Last State]
The operation differs as follows according to the method used the previous time to set
the power off.
If the power was switched off the previous time with the power switch on the panel
The settings before the power was switched off are restored.
If the power was switched off the previous time by cutting off the power supply
The output is off.
This is the case when the equipment is mounted along with other devices on a
rack and the power supply to all the units is switched on/off at the same time.
The operation is done on the Utility screen.
1.
Press the MENU key to display the
top menu window. In this window, select
[Utility] and then press the
ENTER
key to display the Utility screen.
2.
On the Utility screen, select the [Power-
On Output] field and then press the
ENTER key.
3.
The power-on output setting window is
displayed, so select the desired item and
then press the
ENTER key.
The output setting condition choice list is
displayed, so select the desired item and
then press the
ENTER key.
4.
Once the desired power-on output setting
has been completed, select [OK] in the
lower part of the window and then press
the
ENTER key. The power-on
output setting change is applied and the
window closes.
To not apply the power-on output setting
change, select [Cancel] in the lower part of
the window and then press the
ENTER key, or press the
CANCEL
key.
In the top menu,
select [Utility] and
then press the
ENTER key.
MENU
ENTER
On the Utility
screen, select
[Power-On
Output] and then
press the ENTER
key.
ENTER
Set the output
setting condition.
The power-on
output setting
window is
displayed.
ENTER
ENTER
Select [OK] and
then press the
ENTER key.
ENTER
ENTER
CANCEL