YOKOGAWA FG400, Руководство пользователя

Страница: 142 / 171

130
7.
SPECIFICATIONS
IM FG410-01EN
7.3 Frequency, Phase
Frequency setting range
*2: Used through conversion to arbitrary waveform
Frequency setting resolution 0.01 μ Hz
Frequency setting by period Setting equivalent to inverse number of the set period
Frequency accuracy at shipping
*1
±(3 ppm of s 2 pHz)
Frequency aging rate
*1
±1 ppm/year
Phase setting range − 1800.000° to +1800.000°(0.001° resolution)
7.4 Output Characteristics
7.4.1 Amplitude
Setting range 0 Vp-p to 20 Vp-p/open, 0 Vp-p to 10 Vp-p/50 Ω
Peak value combining waveform amplitude and DC
offset is limited to ±10 V/open or lower.
Setting resolution 999.9 mVp-p or lower 4 digits or 0.1 mVp-p
1 Vp-p or higher 5 digits or 1 mVp-p
Accuracy
*1
±(1% of amplitude setting [Vp-p] + 2 mVp-p)/open
Condition: 1 kHz sine, amplitude setting of 20 mVp-p/
open or higher
Setting units Vp-p, Vpk, Vrms, dBV, dBm
Range Auto, hold (selectable)
Maximum output voltage range: 20 Vp-p, 4 Vp-p
Amplitude attenuator range: 0 dB,
− 10 dB, − 20 dB,
− 30 dB
Waveform amplitude resolution Approx. 14 bits
Condition: Amplitude setting of 36 mVp-p/open or
higher
7.4.2 DC offset
Setting range ±10 V/open, ±5 V/50 Ω
Setting resolution ±499.9 mV or lower 4 digits or 0.1 mV
±0.5 V or higher 5 digits or 1 mV
Oscillation Mode Continuous, Modulated,
Sweep (Continuous,
Single-Shot)
Sweep (Gated Single-
Shot), Burst
Sequence
Waveform
Sine 0.01 μ Hz to 30 MHz 0.01 μ Hz to 10 MHz 0.01 μ Hz to 10 MHz
Square 0.01 μ Hz to 15 MHz 0.01 μ Hz to 10 MHz 0.01 μ Hz to 10 MHz
Pulse 0.01 μ Hz to 15 MHz 0.01 μ Hz to 10 MHz Not usable
Ramp 0.01 μ Hz to 5 MHz
0.01 μ Hz to 5 MHz
*2
Parameter-variable
waveform
0.01
μ
Hz to 5 MHz
0.01 μ Hz to 5 MHz
*2
Noise Fixed to 26 MHz equivalent bandwidth
DC Frequency setting invalid
Arbitrary 0.01 μ Hz to 5 MHz