25
IM-P-20200627-01
6.13 Information
This menu shows a collection of information from
the transmitter and contact information from the
manufacturer.
1.
Navigate to program point P113 - Information
and push the navigation button to enter the
menu.
2.
Push the navigation button up and down to
see all of the information
3.
Push the button to leave this menu.
Below is a representation of this information screen:
Version
Software revision
No:
Serial number transmitter
Zero
Zero (Bar)
Span
Span (Bar)
Damping
Damping (in seconds)
Output
Output 4-20 or 20-4 mA
Local Prot
Protection On or Off
Alarm
Alarm output (3.2 or 22.8 mA)
Sec. Value
Selected secondary
configuration
Backlight
Backlight On, Sleep mode or Off
Temp
Temperature unit Celsius or
Fahrenheit
HART version
HART version 5 or 7
Information
P113
•
Rising:
The Burst message is triggered
when the measured value rises above
the triggered value.
•
Falling:
The Burst message is triggered
when the measured value falls below
the triggered value.
•
On-Change:
The Burst message
is triggered when any value in the
measuring changing.
Choose the desired burst mode, and set the
preferred parameters.
6.14 Factory
Only available for the manufacturer.
factory
P114
6.14 Factory
Only available for the manufacturer.
factory
P115
