10
IM-P-20200627-01
5.1 Graphic Display Readout
When the transmitter is powered, a flash screen with the name of the transmitter and the software version
appears for a few seconds. After this the home screen will show the measured value setting as set in the factory.
A
mbar
18.5
0.0%
2 1
3
8
4
5
6
7
n
Explanation of Symbols
1.
Linear output:
Displays when any form of linearization is applied. A Straight line means no
linearization is applied. When a linearization is applied
,
a curve will be displayed.
2.
HART protocol:
Displays a HART symbol.
3.
Write Protection On/Off:
Displays if protection against adjustments and configuration is on or off
4.
Secondary Measurement:
Displays
the secondary
measurement
chosen.
5.
Bargraph 0-100 % from Span:
Displays the percentage of the measured span.
6.
Measurement:
Displays the current measurement in mA, percentage or a selectable unit.
7.
Unit:
Displays the selected unit.
