24
Precision Making
15. Window based OR trigger
ScopeCorder introduction workbook
Copyright © Yokogawa Electric Corporation
Prerequisite:
first.
In this exercise you will configure an OR trigger for a specified Window. This simple and effective function triggers
when a waveform goes IN or OUT in a user-specified range of voltage
Follow these keystrokes:
DONE!
AND trigger
To perform a Window based AND trigger,
simply choose
TYPE
=
AND
using otherwise
these same keystrokes.
Edge detection condition (Edge)
Set the conditions for detecting each trigger source edge. When
Edge is set to
IN
, An edge is detected when the trigger source
enters the specified level range; in our example 450 – 550 mV.