7-10
SM 701730-01E
7.8
Removing the Front Bezel
1.
Remove the printer case. See section 7.4, “Removing the Printer Case.”
2.
Pull out the three knobs in the direction of the arrow shown in the figure below
and remove them.
Note
When the TIME/DIV and V/DIV knobs are removed, the “rib” holding the knob to its shaft
becomes worn down causing the knob to become loose. Therefore, you should replace
the removed knobs with new ones.
3.
As shown in the figure below, lift up the eight tabs that surround the Front Bezel,
then remove the Front Bezel.
DL with the Front Bezel Removed
Содержание DL1720E
Страница 35: ...3 6 SM 701730 01E Figure 3 3 Observed Waveform 3 4 DC Offset Adjustment on the AD Board...
Страница 68: ...7 18 SM 701730 01E DL with the Input Assy Removed 7 13 Removing the Input Assy...
Страница 70: ...7 20 SM 701730 01E DL with the AD Board Assy Removed 7 14 Removing the AD Board Assy...
