h
Select the calculation method of the total loss.
Select the desired calculation method and click it.
("Loss between Markers N and F" is most commonly used.)
i
Click [OK].
j
Click [Next].
Step 4 -- Trace File Selection
c
Set up the number of cores and the start core No.
d
Select the file format same as that of the waveform files.
e
Click [File Select].
f
Click [Folder Select].
g
Select the folder storing the waveform data you
want to load.
Among the files in the folder, the files of the
format specified in Step
d
above are displayed.
h
Click [Batch Set].
From among the selected waveform files, as
many number of files as set in Step
c
are set.
i
Click [OK].
j
Click [Next].
18
